The TP5-C  incorporates the latest and most reliable technology into its electronics and probe assembly.

The TP5-C employs the proven RTD sensor design. A sealed industrial quality overlay provides a user interface that is easy to use with gloves. A sealed, anodized aluminum enclosure protects the circuit board and large LCD from penetration by impact, water, and reactive liquids. An auto-off feature saves battery life.

The TP5-C circuit board is an evolutionary step up from our highly accurate, reliable and successful TL-1 laboratory thermometer. The Power Button's primary function powers the instrument for intervals of about 20 minutes since the last button was accessed. The Power Button can also be used to conserve power and clear the memory, or to make adjustment while in calibration mode. A simple menu operation is displayed by holding the Function Button, and alternately functions to allow adjustments in the calibration mode. Arrows on the left side of the display show the direction of the temperature reading and whether stability has been reached. At the user's discretion stabilized temperatures can be logged at numerous liquid levels for a running average and later displayed for the user's documenting purposes. But this feature never interferes with simply getting an accurate temperature reading.

To endure the environment and be intrinsically safe, the TP5-C is manufactured of materials, which are both immune to petrochemicals and are non-sparking. The probe assembly is constructed with a static-dissipating, non-stick cable, with stainless steel sensor components.

Operational Attributes:

Easily replaceable AAA Batteries, provides an estimated *100 hours operation. Circuit logic automatically indicates low battery condition, automatically shuts off after twenty minutes, shows temperature trend and stabilization, displays error codes for failure determination. The low power backlight for night operation is photo sensor controlled for convenience and battery conservation. In nighttime conditions the backlight illuminates the display. Celsius or Fahrenheit units with C/F indication can be easily chosen from the Function Button. User Manual explains intuitive calibration procedure that can be done through the external faceplate buttons.

Includes:

• NIST traceable calibration certificate

• Limited Warranty

Specifications

Maximum Dimensions: 9.5"L x 7.2"H x 1.76" W Probe: 304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA Cable Jacket, Coaxial Construction Enclosure Material: Anodized Aluminum Stainless Steel Fasteners Batteries: 2 AAA Alkaline; Duracell MX2400 Battery Life of approximately 100 hours Battery operating temperatature range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power if ambient temperature is below 40°F, 4°C or above 30°F, 54°C Temperature: Resolution 0.1 Range: -40 to +400°F, -40 to +204°C Calibrated Accuracy: ±0.2°F from 32 to 200°F ±0.5°F from 200 to 400°F ±0.1°C from 0 to 100°C ±0.3°C from 100 to 200°C 4 Point NIST Traceable Report of Test Long-term drift not to exceed 0.05%/year Meets API requirements Specifications subject to change Certifications Warning: This device must be bonded (grounded) before and during introduction into the tank and remain bonded until complete withdrawal from the tank.