Loading... Please wait...

Our Newsletter


Free Shipping on internet orders over $100 (some restrictions apply)

TL1A Series High Accuracy Digital Stem Thermometer

Image 1
  • Image 1
Price:
$475.00
Shipping:
Calculated at checkout
Custom Sensor Length (If option is selected - Up to 24"):
Certification:
Stem Length:
Quantity:
Bookmark and Share

Product Description

TL1A.jpg

The TL1-A intrinsically safe thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.

The TL-1A is an improved version of the original ThermoProbe model TL-1. The TL-1A incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL-1A has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the “Cordless” TL-1A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data.

4 Point NIST Traceable Calibration and a one year warranty included. We can add a certification point at 115 degrees for an extra charge.

Specifications:

Display: LCD with 0.25 inch characters
Trend Indicating Arrows
Low Battery & Fault indication
User Functions: Auto Off after 20 minutes or continuous operation
Lowest Reading, Highest Reading, Average Reading
Switchable in Units of °F or °C
Construction:
Stainless Steel temperature sensor;
Standard length is 8", 21cm with narrow sensing tip.  Standard probe diameter is 1/4" (6.35mm) with reduced diameter tip of 3/16" (4.76mm)
Sensor mount acetyl plastic
Electronics and display in 3.5" x 1.2" anodized Aluminum enclosure
Molded Silicone seal.
Highly durable display window, graphics and membrane switches.
Weight:
3 ounces, 93 grams
Temperature:
-44 to 600°F, -43 to 315°C
Complete Range Resolution 0.01 Degrees
Calibrated Accuracy (NIST Traceable Report of  Test):
±0.1°F from 14 to 320°F
±0.07°C from -10 to 160°C
Typical (untested) Accuracy:
+-0.2°F below 14 and above 320°F
+-0.12°C below -10 and above 160 °C
(Special calibrations are available to guarantee accuracy
outside of the normally guaranteed range)
Temperature Response:
14 seconds in water bath.
Electronics:
Ultra Low Power Microcontroller
FLASH Memory
20 bit A/D Converter
Recommended Temperature Range For
Best Accuracy 32 to 112 °F, 0 to 44°C
100 Ohm, Class A 1/3 DIN RTD
Immersion depth 4", 11cm
Battery:
20mm Coin Size 3V Lithium, Duracell
Type CR2032
400 hour service life at 70°F, 21°C
Battery Operating Range -4 to 130°F,
-20 to 54°C
Note: Battery may not provide adequate
power below 40°F, 4°C
Options:
Stem length to 39", 1 m. Custom lengths available.
Separate probe with high temp PFE cable
Available in rugged field version, TL-1W
Certification by independent calibration laboratory
Future:
Serial Cable and User Software


Due to the special calibration on these meters, please allow approximately 7 to 10 days to ship. Includes certificate of calibration at the following approximate points: 32, 120, 199 (200) and 300 degrees F. We can also certify at 115 degrees F for an extra charge (below)

Warranty Information

One Year